Shanghai Hengxiang Optical Electronic Co., Ltd. 86-21-54613487 fang@shhxgd.cn
23040 Ppr 53mm Thickness Optical Rotary Encoders With Solid Shaft

23040 Ppr 53mm Thickness Optical Rotary Encoders With Solid Shaft

  • High Light

    53mm thickness Optical Rotary Encoders

    ,

    23040 ppr Optical Rotary Encoders

    ,

    23040 ppr Solid shaft Encoders

  • Protection
    IP50
  • Model Selection
    Solid Shaft
  • Cable Outlet
    Radial Cable/ Radial Socket
  • Output Phase
    A, B, Z
  • Resolution
    Up To 23040ppr
  • Sensing Basic
    Photoeletric
  • Place of Origin
    Shanghai, China
  • Brand Name
    HENGXIANG
  • Certification
    CE,ISO9001
  • Model Number
    S65
  • Minimum Order Quantity
    1Pcs
  • Price
    Consult us
  • Packaging Details
    each 1 piece was packed into single carton box
  • Delivery Time
    3-5 working days for sample order, 7-15 working days for mass order
  • Payment Terms
    L/C, D/A, D/P, Western Union, MoneyGram
  • Supply Ability
    100K pieces per year

23040 Ppr 53mm Thickness Optical Rotary Encoders With Solid Shaft

 S65 encoder with thickness 53mm CE Certificate 5000 PPR Rotary Optical Encoder


ItemsBasic parameters
BrandHENGXIANG
Encoder typeIncremental encoder
External diameter65mm
Thickness53mm
Installation dimensiondiameter 48mm
Shaft length20mm
Solid Shaft diameter8mm(D shape)
Resolution9;20;30;50;60;100;200;250;256;300;360;400;450;500;512;600;720;900
1000;1024;1200;1250;1440;1800;2000;2048;2500;2880;3000;
3600;4000;4096;5000;5760;8192;10000;11520;16384;20000;23040
Output phasePhase A+,B+,Z+ ,A- B- Z-
Supply voltageDC5V ; DC8~30V
Outlettyperadial cable
radial socket
Output modeCollector open circuit output
Voltage output
Push-pull output
Difference outputLong line drive (26LS31)
compatible RS422
Long line drive (RT7272)
Protection gradeIP50 ; IP65
Cable length1M (cable length could be added appropriately by
require, but it need payment individually)
Consumption current100mA MAX
Top response frenquency100KHZ
Allowable ripple23040 Ppr 53mm Thickness Optical Rotary Encoders With Solid Shaft 0≤3%rms
Load Voltage≤DC30V
Insulation strengthAC500V 60s
Insulation resistance10MΩ
GNDnot connect to encoder
Mark to Space ratio45% to 55%
starting torqueless than 5x 10-3 N.m
Intertia momentless than 3x 10-6kg.m2
Shaft loadRadial 30N; Axial 20N
Top REV5000RPM ;IP65≤3000r rpm
Bearing life1.5x109 revs at rated load(100000hrs at 2500RPM)
Environmental temperatureOperating:-20 ~+80°;storage:-25 ~+85°
Enviromental humidityOperating and storage: 35-85%RH(noncondensing)
Vibration(endure)Amplitude 0.75mm,5-55Hz,2 hours for three axis individually
Sock(endure)490m/s2 ,11 ms three times for X,Y,Z direction individually
Shaft MaterialStainless steel
Shell MaterialDia cast aluminium
Cable length1000mm(cable with shielding)
CertificationCE
packageCarton box
Net weightAbout 350g (with package)

 
23040 Ppr 53mm Thickness Optical Rotary Encoders With Solid Shaft 1

Principle of encoder
An incremental rotary encoder outputs a certain amount of Pulses per Revolution. The higher this PPR number, the smaller the angle between each pulse. This PPR number is fixed for ordinary incremental encoders. Programmable incremental encoders can adjust this value to a desired number by a software change.
Today most incremental encoders have a Push-Pull (HTL) or RS422 (TTL) output driver, these have replaced most of the older output circuits like Open Collector NPN, Open Collector PNP, Voltage Output.
Push-Pull (HTL) circuits, also known as Totem Pole, provide a signal level which corresponds to the applied supply voltage. The supply voltage typically ranges from 8 to 30 VDC.
With proper connections you can use the Push Pull interface to replace true open collector circuits by using an external diode connected in a way to limit the direction of the current for RS422 (TTL) circuits provide a constant 5 V signal level that is not dependent on the supply voltage. Two supply voltage ranges can be selected: From 4.75 to 5.5 VDC (can be used to replace open collector output drivers) or from 8 to 30 VDC. Using differential signals the output fully complies to the RS422 standard.
Production date
1. for 1-10 samples: 3-5 working days
2. for 20-50 mass production: 7-10 working days
3. for over 100pcs, production will be discussed with customers and ship on time
Payment terms:
1. T/T, western union, credit card, Paypal, etc
2. 3-5 working days after payment received
3. Encoders will be shipped once ready
Shipment
Goods can shipped via TNT, FedEx, UPS, DHL, EMS, etc.
You could select the express according to your requirements if freight collector
If you do not have any courier account, we will check and find a cheapest and safety express for you.
Our factory has 30% discount with most courier company, so price could be as cheap as possible.
 

More information
If you are looking for more information about our factory or about our products, please contact us or email us right now, we will reply you as soon as possible.