Home ProductsThrough Hole Encoder

Taper Shaft Through Hole Encoder 2500 Ppr 9mm Shaft KN40 6 Poles 5V DC

Taper Shaft Through Hole Encoder 2500 Ppr 9mm Shaft KN40 6 Poles 5V DC

  • Taper Shaft Through Hole Encoder 2500 Ppr 9mm Shaft KN40 6 Poles 5V DC
  • Taper Shaft Through Hole Encoder 2500 Ppr 9mm Shaft KN40 6 Poles 5V DC
Taper Shaft Through Hole Encoder 2500 Ppr 9mm Shaft KN40 6 Poles 5V DC
Product Details:
Place of Origin: Shanghai,China
Brand Name: HENGXIANG
Certification: CE,ISO9001
Model Number: KN40 incremental encoder
Payment & Shipping Terms:
Minimum Order Quantity: 1pcs encoder to start order
Price: negotiable
Packaging Details: each 1 piece was packed into single carton box
Delivery Time: 3-5 working days for sample order, 7-15 working days for mass order
Payment Terms: D/A, D/P, T/T, Western Union, Credit Card, Master Card,Paypal, etc
Supply Ability: 100K pieces per year
Contact Now
Detailed Product Description
Product Name: Through Hole Encoder Encoder Series: KN40 Series
Protection grade: IP40 Cable length: Cable Length
Pulse: 1024ppr- 20000ppr To Select Slew Speed: 5000RPM
Shell Material: Die Cast Aluminum Net Weight: About 90g
High Light:

incremental quadrature encoder

,

stainless steel encoder

Through hole taper shaft encoder 9mm shaft KN40 encoder 2500ppr 6 poles 5VDC

 

Matters needing attention

1. Must choose the power supply voltage: DC5V or DC8-30V

2. Must choose leaf spring plate model number if you select hollow shaft encoder

3. Please advise the motor speed (RPM) that you actually use

4. If you have any other requirements, please provide detail parameters

 

KN40 encoder Specification

 

Brand HENGXIANG
Encoder type Incremental encoder
External diameter 40mm
Thickness 20mm
Installation dimension R17mm, R20mm;R23mm
Hollow shaft type blind hole; through hole, taper hole,solid taper shaft
Solid shaft diameter 10mm (taper shape)
Hollow shaft diameter 6mm;8mm;9mm;9.52mm;10mm
Resolution 1024;2048;2500;3600;5000;7200;10000;14400
1000/4;1000/6;1000/8;1024/4;1024/6;1024/8;2000/4;2000/6;2000/8;2048/4;2048/6;2048/8;2500/4;2500/6;2500/8;4096/4;4096/6;4096/8;5000/4;5000/6;5000/8
Output phase Phase A+,B+,Z+,A-,B-,Z-,U+,V+,W+,U-,V-,W-
Supply voltage DC5V ; DC8--30V
Outlet type Cable out from side
Output mode NPN/PNP(Open Collector Output)
Voltage output
Push-pull output
line drive (26LS31) TTL
line drive(DC8-30V) HTL
TTL(DC5V) phase ABZ are back of phase UVW
Protection grade IP40
Cable length 500mm
Consumption current 100mA MAX
Top response frequency 300KHZ
Allowable ripple ≤3%rms
Load Voltage ≤DC30V
Insulation strength AC500V 60s
Insulation resistance 10MΩ
GND not connect to encoder
Mark to Space ratio 45% to 55%
starting torque less than 5.9x 10-3 N.m
Intertia moment less than 1.5x 10-6kg.m2
Shaft load Radial 30N; Axial 20N

 

Factory Encoder Production Capability

5000 pieces per month

-------- Production Line Capacity

50000 pieces per year

--------Actual Units Produced (Previous Year)

 

Some part number of KN40 series encoder

KN40-J2V5000B6

KN40-J3F4096B8

KN40-J4C1024B9.52

KN40-J6E2048B10

KN40-J12C2500/8Q6

KN40-J2F20000Q8

KN40-J3N16384Q10

KN40-J12C4096/Q84

KN40-J6E2048Q10

KN40-J4C1024Z9

 

Taper Shaft Through Hole Encoder 2500 Ppr 9mm Shaft KN40 6 Poles 5V DC 0

 

 

Signal Circuit of encoder

 

1. The NPN Open Collector -- The NPN Open Collector(NPN) is an interface based on an output circuit with an NPN transistor.

An open collector is the unconnected collector connection of an NPN transistor, whose emitter is connected to earth and whose collector is connected to the output.

2. PNP output

The PNP output is an interface based on an output circuit with a PNP transistor.

3. Push-Pull output(HTL)

High Voltage Transistor Logic functions with a voltage supply in the range 10 and 30 V DC, with 24 V DC being the most usual.

“Low” is defined as an output of between 0 V and 3 V and “high” as between VCC and VCC - 3.5 V.

4. TTL RS-422 output

In a transistor-transistor logic (TTL), both the logical status and the amplification are done by transistors, hence the name.

The TTL output is supplied with either a fixed 5 V voltage or a variable voltage of between 10 and 32 V. For this the low range is defined as the ≤ 0.4 V and the high range as ≥ 2.4 V.

 

Contact Details
Shanghai Hengxiang Optical Electronic Co., Ltd.

Contact Person: Manager

Tel: +8618930077369

Send your inquiry directly to us (0 / 3000)

Other Products

Contact

Factory Address:R301,Building7,Lane 115,No.1276 Nanle Road,SongJiang,Shanghai,201600