Shaft 12mm Through Hole Encoder Line Driver Output For Servo Motor

K48 hollow shaft through hole encoder shaft 12mm line driver output for servo motor​

 Product Description

• Matters needing attention

  1. Must choose the power supply voltage: DC5V or DC8-30V

  2. Must choose leaf spring plate model number if you select hollow shaft encoder

  3. Please advise the motor speed (RPM) that you actually use

  4. If you have any other requirements, please provide detail parameters

   

  Related part number of K48 Series

  K48-J6E2048Q12

  K48-J6C2500Q10

  K48-J12E2000/4Q8

  K48-J12C2500/8Q6

  K48-J6E3600B12

  K48-J6C1024B10

  K48-J12E1200/6B8

  K48-J12C1200/8B6

  K48-J12E1000/6Q12

  K48-J12C1000/16Q10

   

  K48 Series encoder Specification

  Brand	HENGXIANG
  Encoder type	Incremental encoder
  External diameter	48mm
  Thickness	34mm
  Installation dimension	40mm(spring plate 48T40)
  Resolution	50;60;100;200;250;256;300;360;400;450;500;512;600;1000; 1024;1200;2000;2048;2500; 4096;5000;8192
  	1000/4;1000/6;1000/8;1024/4;1024/6；1024/8；2000/4； 2000/6；2000/8；2048/4；2048/6;2048/8；2500/4；2500/6；2500/8;4096/4;4096/6;4096/8;5000/4;5000/6;5000/8;8192/4; 8192/6;8192/8
  Output phase	Phase A+,B+,Z+,A-,B-,Z-,U+,V+,W+,U-,V-,W-
  Supply voltage	DC5V ; DC8--30V
  Outlet type	Cable out from side
  Output mode	NPN/PNP(Open Collector Output)
  	Voltage output
  	Push-pull output
  	line drive (26LS31) TTL
  	line drive(DC8-30V) HTL
  	TTL(DC5V) phase ABZ are back of phase UVW
  Protection grade	IP40
  Cable length	500mm
  Consumption current	100mA MAX
  Top response frequency	300KHZ
  Allowable ripple	≤3%rms
  Load Voltage	≤DC30V
  Insulation strength	AC500V 60s
  Insulation resistance	10MΩ
  GND	not connect to encoder

  

  Signal Circuit of encoder

  1. The NPN Open Collector -- The NPN Open Collector(NPN) is an interface based on an output circuit with an NPN transistor.

  An open collector is the unconnected collector connection of an NPN transistor, whose emitter is connected to earth and whose collector is connected to the output.

  2. PNP output

  The PNP output is an interface based on an output circuit with a PNP transistor.

  3. Push-Pull output(HTL)

  High Voltage Transistor Logic functions with a voltage supply in the range 10 and 30 V DC, with 24 V DC being the most usual.

  “Low” is defined as an output of between 0 V and 3 V and “high” as between VCC and VCC - 3.5 V.

  4. TTL RS-422 output

  In a transistor-transistor logic (TTL), both the logical status and the amplification are done by transistors, hence the name.

  The TTL output is supplied with either a fixed 5 V voltage or a variable voltage of between 10 and 32 V. For this the low range is defined as the ≤ 0.4 V and the high range as ≥ 2.4 V.

   

  Advantage of “HENGXIANG” encoder factory

  · Over 18 years encoder production experience

  · More than 20 years experienced engineers

  · Professional working team

  · High quality standard

  · Quick Response time

  · Utility Model Patent Certificate

  · Own brand and unique brand

  · CE certification for all models

  · Prompt delivery date

  · 100% full inspection before shipment