|Place of Origin:||Shanghai,China|
|Model Number:||K100 quadrature incremental encoder|
|Minimum Order Quantity:||1pcs encoder to order|
|Packaging Details:||each 1 piece was packed into single carton box|
|Delivery Time:||3-5 working days for sample order, 7-15 working days for mass order|
|Payment Terms:||D/A, D/P, T/T, Western Union, Credit Card, Master Card,Paypal, etc|
|Supply Ability:||100K pieces per year|
|Type:||K100 Quadrature Incremental Encoder||Shaft Diameter:||30mm/35mm/38mm/40mm/42mm/45mm|
|Thickness:||38mm||Encoder Type:||Incremental Encoder|
|Top Response Frequency:||300KHZ||Shaft Load:||Radial 90N; Axial 60N|
|Load Voltage:||≤DC30V||External diameter:||100mm|
|Mark To Space Ratio:||IP50||Top REV:||45% To 55%|
high speed rotary encoder,
relative rotary encoder
1024 P/R precision rotary encoder shaft 35mm K100 quadrature incremental encoder for elevator
Quick description of K100 incremental encoder
Environmental temperature: Operating:-20 ～+85°；storage:-25 ～+90°
Shaft load: Radial 90N; Axial 60N
Top REV: 3000RPM
Shaft Material: Stainless steel
Shell Material: die cast aluminum
Installation dimension: R50mm(spring plate 100T90)
Hollow shaft type: through hole (clamping ring at prior and clamping ring at rear)
About Encoder Vibration
Vibration acting on an encoder always cause wrong pulse easily.
So we have to pay more attention to encoder working place.
The more pulse per round, the narrower groovy spacing of grating, ore effect to encoder by vibration, when motor speed is low or even stopped, vibration acting on encoder shaft or encoder shell would cause grating vibration, in this way, encoder might show wrong pulse signal.
Video of Encoder products
There are plenty of encoder video if you still have any doubts on encoder, please email us directly or contact online service right now.
At the same time, you could also visit our YOUTUBY page easily.
Most of the encoder series have videos for reference.
Signal Circuit of encoder
1. The NPN Open Collector -- The NPN Open Collector(NPN) is an interface based on an output circuit with an NPN transistor.
An open collector is the unconnected collector connection of an NPN transistor, whose emitter is connected to earth and whose collector is connected to the output.
2. PNP output
The PNP output is an interface based on an output circuit with a PNP transistor.
3. Push-Pull output(HTL)
High Voltage Transistor Logic functions with a voltage supply in the range 10 and 30 V DC, with 24 V DC being the most usual.
“Low” is defined as an output of between 0 V and 3 V and “high” as between VCC and VCC - 3.5 V.
4. TTL RS-422 output
In a transistor-transistor logic (TTL), both the logical status and the amplification are done by transistors, hence the name.
The TTL output is supplied with either a fixed 5 V voltage or a variable voltage of between 10 and 32 V. For this the low range is defined as the ≤ 0.4 V and the high range as ≥ 2.4 V.
K100 Series Detail Specifications
|Encoder type||Incremental encoder|
|Installation dimension||R50mm(spring plate 100T90)|
|Hollow shaft type||through hole (clamping ring at prior and clamping ring at rear)|
|Hollow shaft diameter||30mm,35mm,38mm;40mm;42mm；45mm；|
|Resolution||100;360;512;1000;1024;1200;2000;2048;2500;2880;3000;3600; 4096; 5000;5760;8192;10000；11520;12000;20000;24000;40000;48000;|
|Output phase||Phase A+,B+,Z+,A-,B-,Z-,U+,V+,W+,U-,V-,W-|
|Supply voltage||DC5V ; DC8-30V|
|Outlet type||Socket out from side|
|Output mode||NPN/PNP(Open Collector Output)|
|line drive (26LS31) TTL|
|line drive(DC8-30V) HTL|
|Consumption current||100mA MAX|
|Top response frequency||300KHZ|
|Shaft Material||Stainless steel|
|Shell Material||die cast aluminum|
|Cable length||1000mm(cable with shielding)|
|Cable length||1M (cable length could be added appropriately by|
|require, but it need payment individually)|
Contact Person: Manager