|Place of Origin:||Shanghai,China|
|Minimum Order Quantity:||1pcs encoder to start order|
|Packaging Details:||each 1 piece was packed into single carton box|
|Delivery Time:||3-5 working days for sample order, 7-15 working days for mass order|
|Payment Terms:||D/A, D/P, T/T, Western Union, Credit Card, Master Card,Paypal, etc|
|Supply Ability:||100K pieces per year|
|Installation Dimension:||Diameter 48mm||Environmental Temperature:||Operating:-20 ～+80°；storage:-25 ～+85°|
|Output Phase:||Phase A,B,Z Or A- B- Z-||Supply Voltage:||DC5V & DC8-30V|
|Protection Grade:||IP50 & IP65|
600rpm Solid Shaft Encoder,
20000ppr Solid Shaft Encoder,
IP65 High Resolution Rotary Encoder
Flange 65*65mm solid shaft encoder 20000ppr 600rpm S65F encoder push-pull output
Matters needing attention
1. Must choose the power supply voltage: DC5V or DC8-30V
2. Must choose leaf spring plate model number if you select hollow shaft encoder
3. Please advise the motor speed (RPM) that you actually use
4. If you have any other requirements, please provide detail parameters
S65F Encoder Detail Specification
|External dimensions||External diameter: 65mm,Thickness: 52.5mm|
|Installation Size:48mm, Flange:67*67*7mm|
|Shaft diameter: 8mm|
|Output phase||Phase A,B,Z or A- B- Z-|
|Supply voltage||DC5V & DC8-30V|
|Outlet type||Cable out from side with metal sleeve|
|Socket out from side|
|NPN/PNP(Open Collector Output)|
|Output mode||Push-pull output|
|line drive (26LS31) TTL|
|line drive(DC8-30V) HTL|
|Environmental temperature||Operating temperature: -20~+80° (Non icing)|
|Storage temperature: -25~+85° (Non icing)|
|Environmental humanity||Operating and storage: 35~85%RH (non-condensing)|
|Protection grade||IP50 & IP65|
|Net weight||About 190g (with package)|
Q: Can your encoder be customized?
A: Yes, our encoder can be customized according to your requirements,
Q: Do you test your encoder product before shipment?
A: Yes, we 100% test and examine every piece before shipping to make sure it work well on your device.
Q: Where is your factory?
A: Our factory is located on Shanghai City.
Q: Can I pay a visit to your factory?
A: Yes, you we welcome to visit our factory at any time if convenient.
Q: How long is your delivery time?
A: Usually 3 working days for sample, 7-15 days for mass production,
The production date is according to order quantity.
Q: How to get the latest price?
A: Contact us and tell me the encoder model selection.
Q: How to select a right encoder model?
A: A right encoder model is based on different applications and parameters, you could contact us for technical support if you have any query
Please email us directly or contact online service right now to get the latest catalogue.
1. Goods can shipped via TNT, FedEx, UPS, DHL, EMS, etc.
2. You could select the express according to your requirements if freight collector
3. If you do not have any courier account, we will check and find a cheapest and safety express for you.
4. Our factory has 30% discount with most courier company, so price could be as cheap as possible.
Each single encoder is packed into a single safe carton with protecting bubble.
Then all encoders will be put into a bigger carton to prepare shipment.
Capsule filling machine
DC garage door motor
DC servo motor
PMDC geared motor
Brushless dc motor
The differential outputs have the highest frequency response capability and the best noise immunity. To ensure this the receiver should also be a differential.
Replacement of Older Output Drivers
A logic gate interprets certain input voltages as high (logic 1) or low (logic 0).
TTL (transistor-transistor-logic): A signal above 2 V is interpreted as logic 1 and a signal less than 0.8 V is interpreted as logic 0. The output voltage ranges between 0-5 V.
HTL (high-threshold-logic): A signal above 3 V is a logic 1 and a signal less than 1 V is a logic 0. The high output signal level is dependent from the supply voltage. Because of the higher voltage difference between logic 0 and 1, the HTL logic is more immune to interference and more resistant against electrical noise.
Mechanical degree is the actual rotation of the shaft in degrees. Electrical degree is used for electrical signals. The required time for completing one alternating voltage/current cycle is defined as 360 electrical degrees (el°). For incremental encoders, one cycle is equal to one complete pulse. With a given PPR the electrical degree can be converted to mechanical degree for any incremental encoder.
Contact Person: Manager