Home ProductsHeavy Duty Encoder

Through Hole 16mm Incremental Encoder K58 28800 Pulse Line Driver Output

Through Hole 16mm Incremental Encoder K58 28800 Pulse Line Driver Output

  • Through Hole 16mm Incremental Encoder K58 28800 Pulse Line Driver Output
  • Through Hole 16mm Incremental Encoder K58 28800 Pulse Line Driver Output
  • Through Hole 16mm Incremental Encoder K58 28800 Pulse Line Driver Output
Through Hole 16mm Incremental Encoder K58 28800 Pulse Line Driver Output
Product Details:
Place of Origin: Shanghai,China
Brand Name: HENGXIANG
Certification: CE,ISO9001
Model Number: K58
Payment & Shipping Terms:
Minimum Order Quantity: 1Pcs
Price: Consult us
Packaging Details: each 1 piece was packed into single carton box
Delivery Time: 3-5 working days for sample order, 7-15 working days for mass order
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability: 100K pieces per year
Contact Now
Detailed Product Description
Product Name: Through Hole 16mm Heavy Duty Encoder K58 Encoder 28800 Pulse Line Driver Output Encoder Type: Incremental Encoder
External diameter: 58mm Thickness: 24mm
Allowable Ripple: ≤3%rms Load Voltage: ≤DC30V
GND: Not Connect To Encoder Starting Torque: Less Than 9.8 X 10-3 N.m
Intertia Moment: Less Than 6.5x 10-6kg.m2 Shaft Material: Stainless Steel
High Light:

Through Hole 16mm Incremental Encoder

,

24mm Thick Incremental Encoder

,

DC30V Incremental Encoder

Through hole 16mm heavy duty encoder K58 encoder 28800 pulse line driver output

 

 Product Description


 

Simple introduction of K58 rotary encoder

Encoder type: Incremental encoder

External diameter: 58mm

Thickness: 24mm

Installation dimension: R34.1mm(spring plate 58T64)

Hollow shaft type: clamping ring at prior or clamping ring at rear

Hollow shaft diameter: 15mm,16mm,18mm;20mm;22mm

Shaft load: Radial 50N; Axial 30N

Bearing life: 1.5x109 revs at rated load(100000hrs at 2500RPM)

 

Specification for K58 series

 

Items

Basic parameters

Brand

HENGXIANG

Encoder type

Incremental encoder

External diameter

58mm

Thickness

24mm

Allowable ripple

≤3%rms

Load Voltage

≤DC30V

GND

not connect to encoder

Mark to Space ratio

45% to 55%

starting torque

less than 9.8 x 10-3 N.m

Intertia moment

less than 6.5x 10-6kg.m2

Shaft load

Radial 50N; Axial 30N

Top REV

3000RPM

Bearing life

1.5x109 revs at rated load(100000hrs at 2500RPM)

Environmental temperature

Operating:-20 ~+85°;storage:-25 ~+90°

Environmental humidity

Operating and storage: 35-85%RH(noncondensing)

Vibration(endure)

Amplitude 1.52mm,5-55Hz,2 hours for three axis individually

Sock(endure)

980m/s2 ,11 ms three times for X,Y,Z direction individually

Shaft Material

Stainless steel

Shell Material

die cast aluminum

Cable length

1000mm(cable with shielding)

Protection grade

IP50

Cable length

1M (cable length could be added appropriately by

 

require, but it need payment individually)

Certification

CE

package

Carton box

Net weight

About 150g (with package)

 

Through Hole 16mm Incremental Encoder K58 28800 Pulse Line Driver Output 0

Principle of encoder

he differential outputs have the highest frequency response capability and the best noise immunity. To ensure this the receiver should also be a differential.

Replacement of Older Output Drivers

 

A logic gate interprets certain input voltages as high (logic 1) or low (logic 0).

TTL (transistor-transistor-logic): A signal above 2 V is interpreted as logic 1 and a signal less than 0.8 V is interpreted as logic 0. The output voltage ranges between 0-5 V.

HTL (high-threshold-logic): A signal above 3 V is a logic 1 and a signal less than 1 V is a logic 0. The high output signal level is dependent from the supply voltage. Because of the higher voltage difference between logic 0 and 1, the HTL logic is more immune to interference and more resistant against electrical noise.

 

Mechanical degree is the actual rotation of the shaft in degrees. Electrical degree is used for electrical signals. The required time for completing one alternating voltage/current cycle is defined as 360 electrical degrees (el°). For incremental encoders, one cycle is equal to one complete pulse. With a given PPR the electrical degree can be converted to mechanical degree for any incremental encoder.

 

About Encoder Vibration

 

Vibration acting on an encoder always cause wrong pulse easily.

So we have to pay more attention to encoder working place.

The more pulse per round, the narrower groovy spacing of grating, ore effect to encoder by vibration, when motor speed is low or even stopped, vibration acting on encoder shaft or encoder shell would cause grating vibration, in this way, encoder might show wrong pulse signal.

 

Contact Details
Shanghai Hengxiang Optical Electronic Co., Ltd.

Contact Person: Manager

Tel: +8618930077369

Send your inquiry directly to us (0 / 3000)

Other Products

Contact

Factory Address:R301,Building7,Lane 115,No.1276 Nanle Road,SongJiang,Shanghai,201600