11520ppr Voltage output K50 high resolution rotary encoder cable 1meter customizable size
Principle of encoder
The differential outputs have the highest frequency response capability and the best noise immunity. To ensure this the receiver should also be a differential.
Replacement of Older Output Drivers
A logic gate interprets certain input voltages as high (logic 1) or low (logic 0).
TTL (transistor-transistor-logic): A signal above 2 V is interpreted as logic 1 and a signal less than 0.8 V is interpreted as logic 0. The output voltage ranges between 0-5 V.
HTL (high-threshold-logic): A signal above 3 V is a logic 1 and a signal less than 1 V is a logic 0. The high output signal level is dependent from the supply voltage. Because of the higher voltage difference between logic 0 and 1, the HTL logic is more immune to interference and more resistant against electrical noise.
Mechanical degree is the actual rotation of the shaft in degrees. Electrical degree is used for electrical signals. The required time for completing one alternating voltage/current cycle is defined as 360 electrical degrees (el°). For incremental encoders, one cycle is equal to one complete pulse. With a given PPR the electrical degree can be converted to mechanical degree for any incremental encoder.
3-5 working days for sample after full paid
7-15 days for mass production after full paid
1. T/T, western union, credit card, Paypal, etc
2. 3-5 working days after payment received
3. Encoders will be shipped once ready
Matters needing attention
1. Must choose the power supply voltage: DC5V or DC8-30V
2. Must choose leaf spring plate model number if you select hollow shaft encoder
3. Please advise the motor speed (RPM) that you actually use
4. If you have any other requirements, please provide detail parameters
Over 18 years encoder production experience
More than 20 years experienced engineers
Professional working team
Utility Model Patent Certificate
Own brand and unique brand
CE certification for all models
Prompt delivery date
|Encoder type||Incremental encoder|
|Output phase||Phase A,B,Z A- B- Z-|
|Supply voltage||DC5V ; DC8-30V|
|Outlet type||Cable out from side|
|Cable out from back|
|Output mode||NPN/PNP(Open Collector Output)|
|Long line drive (26LS31)|
|Long line drive (RT7272)|
|Protection grade||IP50 ; IP65|
|starting torque||less than 9.8X10-3 N.m|
|Intertia moment||less than 6.5x 10-6kg.m2|
|Net weight||About 140g (with package)|
|Shell Material||die cast aluminum|
|Bearing life||1.5x109 revs at rated load(100000hrs at 2500RPM)|
|GND||not connect to encoder|
If you are looking for more information about our factory or about our products, please contact us or email us right now, we will reply you as soon as possible.