58mm bearingless encoder module used on robot arms to control speed and position
Part Number to choose of Z58 Series encoder
Factory Encoder Production Capability
5000 pieces per month
-------- Production Line Capacity
50000 pieces per year
--------Actual Units Produced (Previous Year)
Why choose us?
HENGXIANG brand--The trustworthy partner
CE approved--advantaged product quality;
Fast delivery--strong stock product ability;
Factory directly provide a competitive price;
One-stop service--for your efficient purchasing experience;
OEM design accepted--customized design, your own brand accepted.
1. for 1-10 samples: 3-5 working days
2. for 20-50 mass production: 7-10 working days
3. for over 100pcs, production will be discussed with customers and ship on time
Product Basis information
|Encoder type||bearingless encoder|
|Hollow shaft type||through hole|
|Hollow shaft diameter||14mm;19mm;20mm;24mm;25mm|
|Output phase||Phase A+,B+,Z+,A-,B-,Z-,U+,V+,W+,U-,V-,W-|
|Supply voltage||DC5V ; DC8--30V|
|Outlet type||Cable out from side|
|Output mode||line drive (26LS31) TTL|
|line drive(DC8-30V) HTL|
|Consumption current||120mA MAX|
|Top response frequency||300KHZ|
|GND||not connect to encoder|
|Environmental temperature||Operating:-20 ～+80°；storage:-25 ～+90°|
|Environmental humidity||Operating and storage: 35-85%RH(noncondensing)|
|Net weight||About 85g (with package)|
If you are looking for more information about our factory or about our products, please contact us or email us right now, we will reply you as soon as possible.
Notice for encoder installation
1. Please read the encoder specification carefully before installation
2. Encoder is belong to precision instrument, so we should avoid shock or vibration to protect interior parts.
3. The power supply voltage must be holded within specified range, or encoder could be destroyed.
4. Notice coaxially requirements when you install the power shaft, please use flexible coupling and do not press encoder forcibly.
5. Shielding cable of encoder must be connected to avoid electromagnetism interference of alternating current, cables of encoder should be layout individually.
6. Wiring diagram connection should be strictly follow the specified color in catalogue, or encoder interior circuit may be destroyed
7. Encoder should be apart from powerful magnetic field, dust, oil, water, higher (lower) temperature and caustic or flammable material during working.
8. The encoder cable signal can’t be drew or bent forcibly.