|Place of Origin:||Shanghai,China|
|Model Number:||Z100-J Bearingless encoder|
|Minimum Order Quantity:||1pcs encoder to start order|
|Packaging Details:||each 1 piece was packed into single carton box|
|Delivery Time:||3-5 working days for sample order, 7-15 working days for mass order|
|Payment Terms:||D/A, D/P, T/T, Western Union, Credit Card, Master Card,Paypal, etc|
|Supply Ability:||100K pieces per year|
|Keywords:||Through Hole Encoder||Shaft Diameter:||40mm;63mm;65mm|
|Supply voltage:||DC5V ; DC8--30V||Hollow Shaft Type:||Through Hole|
|Environmental Temperature:||Operating:-20 ～+80°；storage:-25 ～+90°||Environmental Humidity:||Operating And Storage: 35-85%RH(noncondensing)|
|Package:||Carton Box||Net weight :||About 180g (with Package)|
precision rotary encoder,
servo motor encoder
Bearingless encoder outer diameter 100mm 2500ppr 16 poles hollow shaft rotary encoder Z100
If you have already selected the encoder model you are going to order, please email us directly or contact online service right now to get the latest catalogue.
But if you are still have any doubts on choosing a right encoder model number, you are also free to contact us to get the related catalogue.
Quick description for Z100 Series
Output Phase: ABZUVW
Power supply voltage ； DC5V or DC8-30V
Circuit Signal output: HTL, TTL
Weight : 180 grams
Thickness: 16mm-extra thin
Through hole shaft diameter: Min 40mm, Max 65mm
Waveform type : square waveform signal
Usage ； widely used on small robot application
Signal Circuit of encoder
1. The NPN Open Collector -- The NPN Open Collector(NPN) is an interface based on an output circuit with an NPN transistor.
An open collector is the unconnected collector connection of an NPN transistor, whose emitter is connected to earth and whose collector is connected to the output.
2. PNP output
The PNP output is an interface based on an output circuit with a PNP transistor.
3. Push-Pull output(HTL)
High Voltage Transistor Logic functions with a voltage supply in the range 10 and 30 V DC, with 24 V DC being the most usual.
“Low” is defined as an output of between 0 V and 3 V and “high” as between VCC and VCC - 3.5 V.
4. TTL RS-422 output
In a transistor-transistor logic (TTL), both the logical status and the amplification are done by transistors, hence the name.
The TTL output is supplied with either a fixed 5 V voltage or a variable voltage of between 10 and 32 V. For this the low range is defined as the ≤ 0.4 V and the high range as ≥ 2.4 V.
Goods can shipped via TNT, FedEx, UPS, DHL, EMS, etc.
You could select the express according to your requirements if freight collector
If you do not have any courier account, we will check and find a cheapest and safety express for you.
Our factory has 30% discount with most courier company, so price could be as cheap as possible.
About Our Factory
Z100 Series encoder Specification
|Encoder type||bearingless encoder|
|Hollow shaft type||through hole|
|Hollow shaft diameter||40mm;63mm;65mm|
|Supply voltage||DC5V ; DC8--30V|
|Output mode||Radial cable|
|line drive (26LS31) TTL|
|line drive(DC8-30V) HTL|
|rise/fall time||less than 1 us(cable length:2 meters)|
|Consumption current||120mA MAX|
|Top response frequency||300KHZ|
|GND||not connect to encoder|
|Environmental temperature||Operating:-20 ～+80°；storage:-25 ～+90°|
|Environmental humidity||Operating and storage: 35-85%RH(noncondensing)|
Contact Person: Manager