Solid shaft encoder thickness 29mm S52 heavy duty encoder ABZUVW phase IP66
Notice for encoder installation
1. Please read the encoder specification carefully before installation
2. Encoder is belong to precision instrument, so we should avoid shock or vibration to protect interior parts.
3. The power supply voltage must be holded within specified range, or encoder could be destroyed.
4. Notice coaxially requirements when you install the power shaft, please use flexible coupling and do not press encoder forcibly.
5. Shielding cable of encoder must be connected to avoid electromagnetism interference of alternating current, cables of encoder should be layout individually.
6. Wiring diagram connection should be strictly follow the specified color in catalogue, or encoder interior circuit may be destroyed
7. Encoder should be apart from powerful magnetic field, dust, oil, water, higher (lower) temperature and caustic or flammable material during working.
8. The encoder cable signal can’t be drew or bent forcibly.
Quick description for S52 solid shaft encoder
Encoder type: Incremental encoder
External diameter: 51mm
Installation dimension: diameter 40mm
Shaft length: 16mm
Cable length: 1M (cable length could be added appropriately require, but it need payment individually)
Mark to Space ratio: 45% to 55%
Factory Encoder Production Capability
5000 pieces per month
-------- Production Line Capacity
50000 pieces per year
--------Actual Units Produced (Previous Year)
1. T/T, western union, credit card, Paypal, etc
2. 3-5 working days after payment received
3. Encoders will be shipped once ready
1. for 1-10 samples: 3-5 working days
2. for 20-50 mass production: 7-10 working days
3. for over 100pcs, production will be discussed with customers and ship on time
S52 encoder Characteristics
|Consumption current||100mA MAX|
|Top response frequency||300KHZ|
|GND||not connect to encoder|
|Mark to Space ratio||45% to 55%|
|starting torque||less than 5 x 10-3 N.m|
|Intertia moment||less than 3x 10-6kg.m2|
|Shaft load||Radial 50N; Axial 30N|
|Top REV||3000RPM ;IP65≤2000r rpm|
|Bearing life||1.5x109 revs at rated load(100000hrs at 2500RPM)|
|Environmental temperature||Operating:-20 ～+80°；storage:-25 ～+85°|
|Environmental humidity||Operating and storage: 35-85%RH(noncondensing)|
|Vibration(endure)||Amplitude 0.75mm,5-55Hz,2 hours for three axis individually|
|Sock(endure)||490m/s2 ,11 ms three times for X,Y,Z direction individually|
|Shaft Material||Stainless steel|
|Shell Material||die cast aluminum|
|Cable length||1000mm(cable with shielding)|
|Protection grade||IP50 ; IP65|
|Cable length||1M (cable length could be added appropriately by|
|require, but it need payment individually)|
|Net weight||About 300g (with package)|