optical sensor K50 10mm hole shaft incremental RS422 signal output DC10.8 -26.4V
If you have already selected the encoder model you are going to order, please email us directly or contact online service right now to get the latest catalogue.
But if you are still have any doubts on choosing a right encoder model number, you are also free to contact us to get the related catalogue.
Quick Review of K50 rotary encoder
Encoder type: Incremental encoder
External diameter: 50mm
Protection grade: IP50 ; IP65
starting torque:less than 9.8X10-3 N.m
Intertia moment:less than 6.5x 10-6kg.m2
Net weight :About 140g (with package)
1. for 1-10 samples: 3-5 working days
2. for 20-50 mass production: 7-10 working days
3. for over 100pcs, production will be discussed with customers and ship on time
Product Basis information
|Encoder type||Incremental encoder|
|Installation dimension||R27.5mm,R30mm, R34.5mm|
|Hollow shaft type||blind hole ; through hole|
|Hollow shaft diameter||8mm,10mm,12mm;14mm;15mm|
|Output phase||Phase A,B,Z A- B- Z-|
|Supply voltage||DC5V ; DC8-30V|
|Outlet type||Cable out from side|
|Cable out from back|
|Output mode||NPN/PNP(Open Collector Output)|
|Long line drive (26LS31)|
|Long line drive (RT7272)|
|Environmental temperature||Operating temperature: -20~+90°|
|Storage temperature: -25~+100°|
|Environmental humanity||Operating and storage: 35~85%RH (non-condensing)|
|Insulation strength||AC500V 60s|
|Mark to Space ratio||45% to 55%|
|Top response Frequency||300kHz Max|
|Shell Material||die cast aluminum|
|Bearing life||1.5x109 revs at rated load(100000hrs at 2500RPM)|
|GND||not connect to encoder|
|Shaft Material||Stainless steel|
Each single encoder is packed into a single safe carton with protecting bubble.
Then all encoders will be put into a bigger carton to prepare shipment.
About Our Factory
If you are looking for more information about our factory or about our products, please contact us or email us right now, we will reply you as soon as possible.